TDK Lambda EMS 20-125-2 Power Supply

The TDK Lambda EMS 20-125-2 Power Supply is useful in applications where the impact of voltage drops (IR drop) of load cables negatively influences the execution of the load. It could reasonably be expected to recognize the voltage in the load instead of the output terminals of the power supply. Remote sensing, therefore, disposes of the impact of changes in the load current through the power distribution framework. The maximum accessible load voltage is equivalent to the output voltage of the nominal power supply less than the total fall IR.

Every load must be associated with the power supply output terminals, utilizing different pairs of interfacing wires. This will minimize mutual coupling impacts between loads and will hold full advantage of the low output impedance of the power supply. Each pair of interfacing wires must be as short as possible and protected if AC or RF fields are present to decrease noise pickup. Each positive or negative voltage can be applied to the load by grounding one of the output terminals to chassis. The framework should not be grounded in more than one point. Associations between the load and the EMS 20-125-2- should be extremely tight, particularly on units rated for secondary output current. The wires of the load should be as short as possible and heavy enough to carry the maximum output current of the instrument.

This model has an Analog Voltage of 20 V, a current of 125 A, and a power of 220 /1 or 3.

The manual for this model is available on the ApexWaves.com website.